品 名：
pvc免层压银卡
性 能：
图文清晰，色彩还原准确，卡面平整光亮，卡片挺括，粘接强度好，防紫外线能力强
使用方法：
将图文镜像输出于面层（A型）料上，置5---10分钟（或吹干），待图文完全干燥后进行热复合，复合温度≧150摄氏度，转印型材料带热复合完后，请揭去表面保护层
注意事项：
注意防潮，保持干燥，在表面受潮的情况下，烘干后打印，不影响打印效果，打印时*好采用1440dpi以上设置打印，勿折压，转印型材料表面耐磨保护层4小时后才可完全硬化
规格： ０.１５(A料)+０.４６(B料)+０.１５(A料)
包 装： ３张／套５０套／盒１０盒／箱
注 意： A料：是打印料B料：是中料
PVC no-laminated silver card
关 键 字Key words:
PVC no-laminated gold card，PET no-laminated white care，PVC no-laminated white card， no-laminated card material，laminated material
产品描述products describes：
Commodity: PVC no-laminated silver card
Application: employee’s card, member card and so on (as long as the card can make) except the bank card use the film with glue.
Function: graphic clear, color reduction accurate, card face smooth and bright, adhesive strength, strong ultraviolet ray prevention ability.
Use way: let the graphic mirror image output in facing material, wait 5-10 minutes( or blow dry), make hot composite while the graphic completely dry, composite
temperature ≧150 centigrade, transfer printing material after hot composite, please peel off the surface protection layer.
Attention matters: pay attention to damp proof, keep dry. When the surface damp, print after oven dry, don’t affect the print effect. When printing had better use
more than 1440dpi set print, don’t fold pressure, transfer print material surface wear-resisting protection layer can completely harden four hours later.
Specifications: 0.15 (A material) + 0.46 (B material) + 0.15 (A material)
Packing: 3 sheets/set 50sets/case 10cases/carton
Attention: A material: printing material B material: middle material
品名：PET免层压银卡
价格：议价
发货：3天内
